We – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with five various branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
One route Free of charge WHEEL (RA) Solitary course PAWL torque limiter (SW) Disc torque limiter clutch with spring (FFT) –Driven (outer) yoke very same as travel yoke but is mounted on the employ. There are two types of shafts, domestic and metric, which are identifiable by their styles. Domestic are usually one particular of 4 shapes: spherical, square, rectangle or splined. Metric are: bell, star or soccer shaped. In possibly case the principal (entrance) shaft is the very same condition as the secondary shaft, only bigger so that the secondary shaft fits inside of. This allows a telescoping impact to get area when the employ is elevated on the three pt. or during a turning movement these kinds of as a bailer. All shafts have to be sized ahead of use. Attach the put into action to the three pt. and increase and assist it. Connect the correct end to the tractor and endeavor to connect the other to the put into action. If the shaft is way too long trim one of the shafts with a hack saw and try out it once more until finally it suits. This makes it possible for for the put into action to be raised with no binding. The shafts should overlap as considerably as authorized. truck pto shafts and yokes Below 472 new holland haybine pto shaft the pto shield assistance how to eliminate pto shaft from john deere tractor of farm tractor pto shafts managerial ford tractor pto shaft perception pto shaft for john deere mx6 bush hog of travel shaft wira one.three “Serving tractor pto shaft damaged agriculture, six spline pto coupler scoring a achievement by way of top quality of merchandise and honesty in organization”, our goods have been reliable by customers and have acquired a bigger share of marketplace. EPG is willing to cooperate sincerely and build commonly with friends!
Mobile: +86-13083988828escopic flange extended cardan shaft Coupling(SWP-A)
SWP partition profile bearing the cross shaft universal coupling goods: substitution of bearings for, SWP type cardan style bearing break up shaft bolt, appropriate for hoisting and conveying machinery and other hefty machinery, connecting two diverse axis transmission shaft, axis angle of A~F sort not a lot more than 10 levels, the G type is not higher than 5 degrees.
♦Product Construction
♦Basic Parameter And Primary Dimension
| Variety | Tactical diameter D mm |
Nominal torque Tn kN·m |
Fatique torque Tf kN·m |
Axis angle β (°) |
Extend duration S mm |
Dimensions(mm) | Rotary inertia kg·mtwo |
Mass kg |
|||||||||||
| Lmin | D1 js11 |
D2 H7 |
D3 | E | E1 | B×h | h1 | L1 | n-d | Lmin | Improve one hundred |
Lmin | Boost a hundred |
||||||
| SWP160A | one hundred sixty | 16 | eight | ≤10 | fifty | 660 | one hundred forty | 95 | 114 | fifteen | four | 20×12 | six | eighty five | 6-thirteen | .thirteen | .0059 | forty seven | 2.1 |
| SWP180A | a hundred and eighty | twenty | ten | ≤10 | 60 | 752 | a hundred and fifty five | 105 | 121 | fifteen | 4 | 24×14 | 7 | ninety five | six-15 | .22 | .0072 | sixty | 2.3 |
| SWP200A | two hundred | 31.5 | sixteen | ≤10 | 70 | 823 | 175 | 125 | 17 | 17 | 5 | 28×16 | eight | 110 | 8-15 | .37 | .0114 | eighty one | 3.four |
| SWP225A | 225 | 40 | twenty | ≤10 | 76 | 933 | 196 | one hundred thirty five | 152 | 20 | 5 | 32×18 | 9 | a hundred thirty | 8-17 | .63 | .0290 | 109 | six.6 |
| SWP250A | 250 | sixty three | 31.5 | ≤10 | eighty | 978 | 218 | a hundred and fifty | 168 | twenty five | five | 40×25 | 12.5 | 135 | 8-19 | one.02 | .0407 | 147 | seven.3 |
| SWP285A | 285 | 90 | forty five | ≤10 | 100 | 1133 | 245 | one hundred seventy | 194 | 27 | 7 | 40×30 | fifteen | a hundred and fifty | 8-21 | 2.17 | .0702 | 241 | 9.four |
| SWP315A | 315 | one hundred forty | sixty three | ≤10 | 110 | 1250 | 280 | 185 | 219 | 32 | 7 | 40×30 | fifteen | one hundred seventy | 10-23 | 3.86 | .1144 | 322 | 12. |
| SWP350A | 350 | 180 | 90 | ≤10 | a hundred and twenty | 1380 | 310 | 210 | 245 | 35 | eight | 50×32 | 16 | 185 | ten-23 | 6.66 | .1663 | 428 | thirteen.6 |
| SWP390A | 390 | 250 | 112 | ≤10 | one hundred twenty | 1495 | 345 | 235 | 273 | 40 | 8 | 70×36 | eighteen | 205 | 10-25 | eleven.fifty three | .2695 | 566 | eighteen. |
| SWP435A | 435 | 355 | 160 | ≤10 | 150 | 1710 | 385 | 255 | 299 | 42 | 10 | 80×40 | twenty | 235 | 16-28 | 21.eighty one | .3645 | 932 | twenty. |
| SWP480A | 480 | 450 | 224 | ≤10 | 170 | 1910 | 425 | 275 | 351 | forty seven | 12 | 90×45 | 22.5 | 265 | 16-31 | 38.04 | .7028 | 1294 | 28. |
| SWP550A | 550 | 710 | 315 | ≤10 | 190 | 2135 | 492 | 320 | 402 | 50 | twelve | 100×45 | 22.five | 290 | 16-31 | sixty one.28 | 1.1842 | 1744 | 35.7 |
| SWP600A | 600 | a thousand | 500 | ≤10 | 210 | 3580 | 544 | 380 | 450 | fifty five | 15 | 90×55 | 27.five | 360 | 22-34 | 98.sixty three | 1.7159 | 2330 | 40.five |
| SWP640A | 640 | 1250 | 630 | ≤10 | 230 | 2685 | 575 | 385 | 480 | 60 | 15 | 100×60 | 30 | 385 | eighteen-38 | 167.67 | 2.3080 | 3153 | forty eight.three |
·Observe:L is the length of installation,including the price of S/Z shrinkage.
♦Product Present
♦Cardan Shaft Kinds
We can offer you SWP,SWC,WSD,WS universal coupling as pursuing:
Welded shaft kind with length compensation / expansion joint
Short kind with size compensation / expansion joint
Brief kind without having size payment / expansion joint
Lengthy variety without having size payment / expansion joint
Double flange with size compensation / expansion joint
Long sort with big length payment / big growth joint
Super Short variety with length payment / expansion joint
♦Other Items Checklist
| Transmission Machinery Components Name |
Product |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Organization
Our company materials various varieties of merchandise. High high quality and affordable price. We adhere to the theory of “top quality 1st, provider very first, steady enhancement and innovation to satisfy the consumers” for the management and “zero defect, zero complaints” as the high quality objective. To best our provider, we give the items with good top quality at the affordable cost.
Welcome to customize goods from our manufacturing unit and you should give your style drawings or speak to us if you need to have other specifications.
♦Our Services
1.Design and style Solutions
Our style team has encounter in cardan shaft relating to item layout and development. If you have any wants for your new solution or would like to make additional advancements, we are listed here to supply our support.
two.Item Providers
uncooked resources → Cutting → Forging →Rough machining →Shot blasting →Heat remedy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could develop the sample in accordance to your necessity and amend the sample continually to satisfy your require.
four.Analysis & Development
We generally analysis the new demands of the market place and produce the new design when there is new automobiles in the industry.
5.Top quality Management
Every action need to be unique check by Professional Personnel in accordance to the normal of ISO9001 and TS16949.
♦FAQ
Q 1: Are you investing business or producer?
A: We are a professional producer specializing in production
different series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the buyers with customized artworks of PDF or AI structure.
Q 3:How prolonged is your delivery time?
Usually it is twenty-thirty days if the items are not in inventory. It is in accordance to amount.
Q 4: Do you give samples ? Is it free of charge or additional ?
Yes, we could provide the sample but not for free of charge.Actually we have a very good value basic principle, when you make the bulk buy then value of sample will be deducted.
Q 5: How long is your guarantee?
A: Our Guarantee is twelve month underneath standard circumstance.
Q 6: What is the MOQ?
A:Generally our MOQ is 1pcs.
Q 7: Do you have inspection methods for coupling ?
A:one hundred% self-inspection just before packing.
Q eight: Can I have a visit to your manufacturing facility before the get?
A: Sure,welcome to check out our manufacturing unit.
Q 9: What’s your payment?
A:1) T/T. two) L/C
♦Contact Us
World wide web:
Insert: No.one Fuyang Street,Chengnan park,Jingjiang City,Jiangsu Province,China
