We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Speed increasing gear box of 135m finishing mill
Composition of speed increasing gearbox
Spare parts of speed increasing gearbox case(lower case, middle case and cover), support base, big gear, transmission axis, bevel wheel and lubrication system.
1.technical parameter
| Highest speed output ratio | 0.251497 |
| Lowest speed output ratio | 0.311377 |
| Motor power | 4800KW |
| Motor speed | 750/1100r/min |
| High-speed output shaft speed | 4004r/min |
| Low-speed output ratio | 3234r/min |
| Motor wor ept speed | 1007r/min |
| The backlash is less than | 0.36mm |
2.Technical characteristics
Box is melt with thick steel with great quality to reach the intensity that the case required. Case should take stress aging treatment before the produce to reach the stability that required. High precision lathe machining is used for the assembly of cases to insure the locating accuracy of each bearing holes and related joint surface.
Big gears and gear shaft used carbon alloy steel forging blank, after roughing, workpiece need to take ultrasonic flaw detection process to quench. In order to ensure the tooth surface with high hardness, tooth surface need to take carburizing and quenching treatment after semi-finishing .Fine grind of tooth surface to insure the high accuracy, after finishing the production of gear, the balance test is needed, the trail speed is 1500r/min and the balance precision grade is G2.5. the trail speed of bevel wheel is 3500r/min, the balance precision grade is G1, in so to ensure the rotary precision of the gears.
Transmission shaft use the alloy steel forging blank, transmission shaft takes quenched to make sure the intensity and durableness. After the semi- finishing, transmission need to grind to guarantee the accuracy of every workpiece.
When the assemble finished, the no-loading test should be keep 2-4hours, the speed is 1100r/min, the temperature of shaft should not exceed 40ºC,the work of gear should be smooth, no hitting noise and concussion, every joint surface should not have oil spill phenomenon.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
