DK Detachable Teeth Sprockets

Any damage on the teeth surfaces of the sprocket diminishes the life in the conveyor chain.
With conventional sprockets, considerably worn sprocket teeth have been repaired by teeth padding or even the entire sprocket was replaced. In both situation, repair was pricey and with teeth padding, accuracy was impaired. We formulated new sprockets with detachable teeth for independent substitute. This sprocket is extremely rated by our clients for the dramatic savings in value and time.
Structure
The teeth may be replaced by two approaches: individual tooth substitute or sectional teeth substitute.
The bolts and nuts utilised for mounting the teeth on on the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated on the appropriate.
The over photograph as well as major proper illustration present a sprocket for individual tooth replacement. Because the joint encounter amongst the replaced teeth and the sprocket is formed inside a distinctive arc, the bonding accuracy is higher as well as the sprocket strength is enhanced. On top of that, since the load acting to the mounting bolts is decreased, there may be significantly less possibility of loosening. This sprocket construction is patented.
You’ll find two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for significant sprockets acquiring hefty loads and welded sheet steel hubs for other applications.