General Description
Consisting of a pressure balanced gear pump, DC 
motor, multi-functional manifold, valves, tank, ect., this power unit is designed to operate materials managing products. The reducing motion is achived through the solenoid valve with the lowering speed managed by an adjustable needle valve. The left and proper functions are equipped by using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please seek the advice of our income engineer for your various pump displacement, motor power or tank capacity.
Particular Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned in advance of installation of the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of charge of impurities.N46 hydraulic oil is recommended.
4. This electrical power unit needs to be mounted horizontal.
5. Check the oil degree in the tank soon after the primary start off of your electrical power unit.
6. Oil shifting is needed just after the initial a hundred operation hrs, afterwards the moment every 3000 hrs.
